74LS192 and RF remote control operated one digit up down counter

This is a simple up and down counter that can be operated using a four-channel RF remote. The 74LS192/CD40192 counter chip is used in this gadget. The 74LS192/CD40192 chip is triggered by a NE555 (in monostable mode). The 4511 chip controls a seven-segment display.

Schematic:

All the components required to build this counter are listed below:

1. 1 x 74LS192 or CD40192
2. 7 x 100 Ohm resistors
3. 5 x 1K Ohm resistors
4. 4 x 10K resistors
5. 2 x tactile reset switch
6. 2 x 0.1uF capacitors
7. 2 x  100uF electrolytic capacitor
8. 2 x BC557 transistors
9. 1 x 0.56″ seven segment display common cathode
10. 3 x 16 pins IC socket
11. 2 x 8 pins IC socket
12. 1 x 7 pins female headers
13. 1 x CD4511
14. 1 x CD4049
15. 2 x NE555
16. 1 x MicroUSB connector for 5V

Download: Gerber Files